The following is how to Reset Epson Printer L110, L210, L300, L350 or L355 series, either using the manual method (without application) or automatic reset using the latest version of the Resetter Adjustment Program (AdjProg.exe).
Almost all Epson Printer series (including the L110, L210, L300, L350 or L355 series) when there is an error (not wanting to print a document), usually the ink / paper indicator light will flash continuously or simultaneously repeatedly. An example is like the following picture.
In addition, various warnings will also appear on the computer monitor (PC / Laptop), such as "Ink pad is at the end of its service live", "Ink waste is full", "Service required", "it is nearly time to reset the ink levels "," it is time to reset the ink levels ", and other error messages.
Why did it happen? The answer is that there are many factors at play. Among them are printer components that have problems, the ink pad counter is full, the foam waste ink disposal pads are full, the maximum number has reached the limit and so on.
1. Check the Cause of the Error
When your printer gets one of these problems / error messages, don't panic first, let alone take the printer to a service worker. Because I'm sure you guys handle it easily, by doing a total reset.
In this case, to reset the Epson L110 L210 L300 L350 L355 printer there are two methods you can do. First manual reset (without application) and second automatic reset (using Resetter Adjprog.exe / Epson Adjustment Program).
But before doing the reset, you should check some parts of the printer which may be one of the main causes of errors or the paper / ink indicator light blinks continuously, including:
- Ink Tube: Check the ink in the printer tube, if it runs out please refill.
- Cartridge: Check printer cartridges. Make sure there is no dirt stuck to it and see its position, whether it is installed properly or not.
- Roller: Make sure there is no paper jam in the printer roller.
- Cable: Check the cable that connects the printer to the computer. Make sure both ends are securely attached.
If the things mentioned above have been done, but the printer is still not working, you should do a Total Reset, either manually or using the Epson L110 / L210 / L300 / L350 / L355 resetter adjustment program.
2. How to Reset Manual Without Application
Why does the Epson printer need to be reset? The reason is to return all settings to their original position and clean all data stored in the printer's IC Counter (EEPROM).
For example, returning the configuration to the initial position (default), resetting the maximum number of printed documents to zero, normalizing the ink pad counter, and so on.
Well, one of the easiest ways to reset the Epson L210, L110, L300, L350, L355 is to do a manual reset without any software / applications. For a guide on how to reset this manual, please refer to the steps below.
- Unplug the power cord for about 3-5 minutes.
- Turn it back on and wait for the printer to turn on perfectly.
- Next, press and hold the resume button (ink logo) for 5 seconds, then release.
- After that, press and hold the resume button again for 3 seconds, then release.
- Shortly after that, the printer will automatically reset and wait for it to finish.
- If successful, the indicator light will not flash and is ready to be used again.
But if the manual reset doesn't work and the printer indicator light is still blinking, then try doing an automatic reset using a special resetter adjustment program software.
3. How to Auto Reset Using Epson AdjProg Resetter
One of the first steps that must be taken before doing an automatic reset of the Epson L110 L210 L300 L350 L355 is to prepare the Resetter Adjustment Program software (Adjprog.exe). Now to get it, you can download it below for free along with a tutorial on how to use it.
3.1. Download Resetter Epson Adjustment Program
Adjustment Program / Adjprog.exe file
2.66 MB in size
Support Windows 7, 8, 8.1, 10 (32bit / 64bit)
Epson printers
L110 L210 L300 L350 L355 series
Important Note: Before downloading the Resetter Epson Ajustment Program file above, please turn off your computer's Antivirus first (don't worry, because this file is not a virus).
Disclaimer: All forms of download files are only educational materials. The risks that may arise, please bear it yourself (Do With Your Own Risk).
3.2. How to Use Resetter Epson Adjustment Program
- The first step you have to do is please download the Resetter Epson Adjustment Program file L210, L110, L300, L350, L355 above, then extract the file using the 7-Zip or WinRar application.
- If so, the next step, please run the Epson Resetter Adjustment Program application by clicking 2X on the Adjprog.exe icon.
- Click the [Select] button then select the printer model in [Model Name] and the USB port that is used, but it is better to choose [Auto Selection] only. After that click [OK].
- Next, click [Particular Adjustment Mode] then select [Waste ink pad counter] then [OK].
- In the next menu, tick on [Main pad counter], then click [Check]. At this stage, the printer will provide some important information about the printer, including how many times it has printed.
- After that, tick again on [Main pad counter] and continue by clicking [Initialization]. Wait for the process to finish.
- After the reset process is complete, the computer screen will display a notification [Please Turn On and Turn Off your printer]. Now at this stage, please turn off and then turn on your printer again.
- Done. However, to further confirm whether the printer is back to normal, please try printing a document.
Usually, when the printer is properly set, there will be no more blinking on the indicator light and at this stage you can use it as usual.
This is the complete guide on how to do manual and automatic reset for the Epson L210, L110, L300, L350, L355 printers on this occasion, hopefully this will be useful for those of you who are looking for a solution to errors that occur on your printer. Good luck.
